Removable Tint For Coupe Cars

Lower the car window slightly. Position the pre-cut tint against the glass, ensuring the bottom edge is tucked securely into the inner window seal (weatherstripping). Make sure the film is centered and covers the entire glass surface.

Carefully slide the tint horizontally and vertically to ensure there are no gaps at the edges. The top edge of the tint should sit just below the top of the glass so that it doesn't peel when the window is rolled up or down.

Once the tint is perfectly positioned, locate the pull-tab or the edge of the protective liner. Slowly peel away the backing tape to expose the adhesive surface. Do this carefully to avoid shifting the tint out of its aligned position.

Use your fingers or a smoothing tool (squeegee) to press firmly along the edges of the window. Start from the center and work outward to push out any remaining air bubbles or moisture, ensuring a tight, permanent seal against the glass.